Double Glazing Lock Repairs
The best locks for your windows and doors can stop burglars from gaining entry into your home. They generally don't like breaking glass or trying to wiggle through windows that are open.
However, some double-glazing owners have had problems with their door or window lock after it's been installed. These problems can often be resolved without the need for a new double glazing.
Broken or damaged locks
If your uPVC window or door lock is damaged or defective, then a locksmith can fix it for you. They will be able to fix the striker plates, hinges, and locks on your double glazing. They will also be able to move the cylinder around to correct any misalignment issues that could be causing your handle to not work properly.
The mechanism could be seized when the key is inserted into the lock, but it will not turn or is difficult to insert. This can be caused by grime or dirt getting stuck in the mechanism. If this is the case, then it is possible to clean the lock and lubricate it. It is important to apply a dry lubricant such as teflon or graphite, rather than oil, which can attract dirt and stick to the inside of the mechanism. After lubricating the lock, you must insert the key and attempt to turn it. The lubricant should work through the mechanism, and the lock should be able to turn easily.
A damaged lock can be caused by loose screws inside the mechanism of the lock. They can become loose and fall out or even break completely, preventing the lock from being able to function properly. A screwdriver can be used to tighten these screws, but caution must be taken not to over-tighten them since this could cause damage to the internal components.
A faulty lock is dangerous for you and your family. This is particularly relevant if you have young children. They could easily open the door without your knowledge, giving them access to your house. If you are worried about this happening, a locksmith who is vetted can provide a quick and efficient service to re-secure your double glazing doors.
Misty Glaze are a professional uPVC and double glazing business in Lancing, who can repair all kinds of damaged and damaged mechanisms such as handles, cylinders, handles and lock systems on uPVC windows and doors. We can also modify your uPVC or double glazing locking system to meet your particular requirements, meaning that in a lot of cases replacement windows and doors are not necessary.
Broken or Faulty Handles
A lot of double-glazed windows come with a multi-point lock as part of the overall security package. This is a great option for those who are concerned about opportunistic burglars trying to gain entry to their home. It is also a good idea to ask your locksmith about anti-lift blocks, these can be fitted on top of the existing locks and help keep your window firmly secured in its closed position.
It's not uncommon for handle locks to get damaged or fail. They are the first part of your window that will be pushed open by criminals who want to break in. The good news is that this is among the most straightforward parts to repair.
Modern uPVC handles as well as aluminium handles are equipped with a multi-point locking mechanism, referred to as Espagnolette which is designed to resist forced entry. This security upgrade is offered as an option with new uPVC windows. Older style uPVC and aluminium handles can be upgraded to shoot bolt locking systems, again as an optional extra on new double glazed windows.
If a handle is defective, it's crucial to get it repaired as quickly as possible. Handles that are damaged can prevent the window from closing correctly and letting in a draft. It may be a weakness that burglars with a plethora of opportunities might exploit, putting your belongings and family at risk of theft.
The process of fixing the damaged mechanism begins with getting access to the window frame and removing the damaged handle. The gearbox can then be accessed to determine the kind of gearbox that is used to open the handle. This will permit an alternative that is compatible with the profile and the internal window frame mechanisms.
After the mechanism has been replaced, the handle may be returned to the original screws. However, we recommend replacing them with longer screws as they will provide the most secure fit. The final stage is to apply a layer of clear sealant to shield the handle from further corrosion. After you've completed this step, your window should be fully functional again at a fraction the cost of replacing it.
Hinges that are broken or faulty
If your windows don't close properly, draughts could enter your home, the security barriers will become weaker and you run the risk of water damage or damp. Window hinges that break or become faulty are a common issue and are easily fixed.
If your uPVC windows won't close or open, it is likely that the hinges require to be repaired or replaced. A lot of window manufacturers will require you to buy an entirely new window unit to resolve this issue, but we can replace the hinges and save you money.
Window hinges may break after repeated use, or they might be damaged due to corrosion over time. If you find a damaged hinge, it's crucial to take measures to prevent further damage by being careful not to make the window swing to open or close.
window repair Canvey Island can find the right parts for your hinge by identifying the type of hinge it is. Maco, Mila and Roto are all window hinges. It's best to consult an expert in this situation so that you don't make the mistake of buying parts that are not compatible with your current hardware and cause further damage.
A damaged hinge can be a big issue for your uPVC windows and doors. They can be a major source of noise and also allow for water infiltration that can cause damage to your windows.
Check that the pin barrels on both hinge halves are aligned. If it isn't, tap the headpin with a hammer in order to create a slight bend in hinge barrel. This will hold the pin in its place. Ask a friend to hold the doors as you take off hinge screws and hinges. Replace the hinges and attach screws using glue. Finally, secure the hinges with clamps or weights until the glue is drying.
After your hinges have been repaired and repaired, you should be able to re-install the door and attach the handle. It is a good idea to replace the screws using the same length of wood dowels as the original screw, so that they are in line with each other.
Glass that is Broken or damaged
While uPVC windows do a great job of keeping the cold out and warm in, they are susceptible to becoming damaged over time. This can be the case with damaged or broken glass and faulty locks. If neglected, this could be a costly problem. It can also detract from the aesthetics of your home and may lead to a loss of insulation, so it is essential to fix any damage as quickly as possible.
If your glass is broken but isn't shattered it is possible to fix it yourself using the appropriate tools and methods. Make sure the area surrounding the glass that has been broken is free of debris, so that fragments don't cause injury or trip hazards. After that, take away all broken glass pieces and dispose of them in the proper way. Apply masking tape to the entire area. This will prevent shards of glass from sticking to your skin and splintering when you move them. If you're dealing with a double-paned window it's a good idea prepare the glass before gluing it back in place so that you know you'll have enough space to complete the task.
Use a dry, clean cloth to wipe down the surface of the broken glass and the frame prior to applying the glue. Follow the instructions for application and curing times which may differ from product to product. Based on the degree of the crack you may want to hold the glass during curing. This can be done using lightweight clamps that are specifically designed to support fragile materials.
After the adhesive has completely set, carefully place the glass inside the window frame. Make sure it is flush with the frame edge and that there aren't any gaps between the glass sash and the frame. Be cautious not to flex the window when it's being put back in place, as this can weaken the seal and cause condensation and water infiltration.
If you have a glass door that's completely shattered or has larger cracks, call a professional glazier like O'Brien(r) to arrange a replacement. Leaving broken glass unattended can be a risk to pets and children and is why it's important to act quickly.